Tweet
I have a 2000 115 hp that just lost spark in between start ups. ran fine when I shut it off then would not start when moving to new spot. what would quit like that? the coil packs or something electrical, I have fuel, thanks
-
-
If you have a service manual for your motor, you need to start testing the circuits. I'd start with the kill switch (it may be bad-we hope). After that, you'll need to start checking, by the manual, where your fuses are and if getting power to those fuses with key in on position. Don't assume that every wire is good, follow each wire to each connection. This is a slow step by step search looking for a bad connection, or wire.
If you don't have a manual, check fuses at the motor, then get a manual, you will need the wiring schematics for checking the wiring.
Good luck, Post us back if you find anything
Comment