1985 50hp powerhead help

[KellerS]

Okay I finally got the powerhead from the mid-section, but now, in trying to get the four bolts on the bottom of the adapter exhaust housing, all four bolts snapped. I appears there is on bolt on the end that may need to come out as well, but it is stuck also, does this bolt on the end also have to come out, if not then the plate must be stuck from the four corroded bolts that snapped.


Thanks again for everyones help

Scott

[boats.net]

If am am not mistaking, there should be 6 bolts that hold the adapter plate to the midsection.